2025 SeaValue Canada Premium - Catalog - Page 154
152
Electrical
ML-SERIES HD REMOTE BATTERY SWITCH
Allows high amp switching under load from remote
locations or manually, eliminating long cable runs. Includes
remote control switch # 2145 with lockout slide to prevent
accidental switching. 12V DC coil controls circuits up to
32V DC and is rated for 500 amps continuous duty and
2500 cranking amps (10 sec.) to handle even large diesel
engines. Magnetic latch only draws current when changing
the state of switch: it draws no current in the "ON" or "OFF"
states. 3/8" Tin plated copper studs.
Item#
661-7700
Volts
12V
Item#
661-5024
• Compact, lightweight
• Removable key
• Countersunk recesses for surface mount application
• Standard 21/16" (52 mm) hole cut out (same as standard
gauge hole)
• Inside: captive inserts for 3/16" (4.8 mm) nuts providing
full access for cables with no restrictions
• Standard interchange label system
• Molded in high temperature, fiber reinforced plastics
Mount
Surface or Recessed
Easy to install 4 ATO®/ATC® fused circuits mounts directly
on the battery terminal studs. Screw terminals for securing
wires with insulated ring terminals and covers included.
• Screw terminals for securing wires
• Accepts small format labels
• Insulating cover meets ABYC/USCG insulation
requirements
• Ignition Protected. For use in gasoline engine compartment
• Includes 4 write-on circuit labels
• Includes four 16-14 AWG and four 12-10 AWG Nylon
insulated ring terminals
• Fuses sold separately
Includes a 4-circuit negative busbar
Special
457.99 EA
701 SURFACE OR RECESS MOUNTED
CONTOUR MANUAL BATTERY MASTER SWITCH
Item#
969-701
ST-BLADE BATTERY TERMINAL MOUNT
FUSE BLOCK
Volts
6-48
Size
23/4" x 23/4" x 3"
Description
ATO / ATC Fuse Block Kit
Amps
30A
Special
80.99 EA
POWERPOST CABLE CONNECTOR
Connect high amperage cables securely. Includes insulator
caps. 48 volts DC maximum. Posts have no amperage
rating because amperage flows between terminals stacked
on the post and is determined by the wire and terminals
used.
Item#
Size
Stud
Special
661-2002
3.30'' x 1.75'' 5/16" x 7/8''
31.99 EA
3
7
661-2003
3.30'' x 1.75'' /8" x /8''
31.99 EA
Special
69.99 EA
DUAL POWERPOST CABLE CONNECTOR
701-S MINI BATTERY SELECTOR SWITCH
Provides a termination point for extending the length of
outboard harnesses or other conductors.
• Designed for connecting high amperage conductors
• 2018 is also designed for outboard engine installation
when factory cables need to be extended
• One-piece serrated flange nuts ensure correct and secure
connections
• Continuous Rating Not rated-amperage flows between
terminals stacked on post and is determined by wire and
terminals used.
• Voltage Max. Operating: 48V DC
• Mounting Holes Accepts: #10 (M5) Screws
• 2.75''L x 1.75''H
4 POSITION - OFF/1/BOTH/2
The 701-S is the most compact selector switch available
on the market. Housed in the same manner as the
701 and includes the same removable side plates and
back cover. While BEP Marine foremost recommends
isolated battery systems as outlined with our distribution
clusters, Offers a simple economical way of separating
two batteries.
• Rated for 200 amps continuous, 300 intermittent, 1000 cranking
• Panel mount version requires a standard 11/16" cut out
Item#
969-701S
Mount
Surface or Recessed
Volts
6-48
Size
23/4" x 23/4" x 3"
Special
85.99 EA
Allows interruption of the main battery cable for
effective protection against unauthorized use of the
boat. Positive or negative cable can be switched off as
required. Key can be removed in "off" position, current
interrupted. Seawater-proof. Tin-plated contacts. U.L.
listed. Line connection: 2 screw terminals, M10.
Maximum load 12V: 1000 A (10 sec.) 24V: 500 A (10
sec.). Black base, red knob.
Size
21/4" Dia.
Description
Spare Key
Special
50.99 EA
TERMINAL BLOCK
BATTERY MASTER SWITCH
Item#
265-002843011
Repl. Parts
265-706729011
Item#
661-2018
Special
61.99 EA
Special
15.99 EA
Terminal/Fuse Blocks and Buss Bars
4 Gang
6 Gang
8 Gang
10 Gang
Corrosion resistant construction. Moisture repellent bakelite insulator base. Nickel
plated brass terminals and #8-32 screws. Protective insulator barrier strips. Rated
for 30A @12V.
Item#
Gangs
Size
Special
8.99 EA
50-13561
4
4"L x 15/16"W x 11/16"H
50-13571
6
43/8"L x 15/16"W x 11/16"H
11.99 EA
50-13581
8
51/2"L x 15/16"W x 11/16"H
11.99 EA
12.99 EA
50-13591
10
65/8"L x 15/16"W x 11/16"H
TERMINAL BLOCK
BATTERY TERMINAL MOUNT BUSBARS
4-Gang
Tin plated copper bus handles voltage up to 32VDC and is rated for 100 Amps. #832 Screw terminals w/captive star lock washers ensure a good connection.
Item#
661-2340
Special
56.99 EA
6-Gang
A closed back design completely insulates power from the mounting surface. Each
screw pair is one isolated circuit. Optional jumpers allow creation of common
circuits. Tin-Plated Brass.
Item#
Gangs
Amps
Fastener
Special
661-2404
4
20
#6
11.99 EA
661-2406
6
20
#6
15.99 EA
661-2504
4
30
#8
14.99 EA
661-2506
6
30
#8
20.99 EA
