2025 SeaValue Canada Premium - Catalog - Page 194
192
Maintenance
BRUSHING THINNER 120/T-10
FIBERGLASS SURFACE PREP-LOW V.O.C.
It's extremely important to remove contaminants from
fiberglass for full adhesion of primers and/or antifouling
paints. With its special low VOC formula, Fiberglass
Surface Prep does this extremely effectively. It can also be
used to remove amine blush from clear epoxy.
• Effective contamination / mold remover
• Can be used for cleaning previously painted surfaces prior
to sanding before repainting topside finishes
• And it can be used to prepare inflatable boats for
antifouling
Item#
94-YMA601VQCA
Size
Quart
Special
50.99 EA
A general purpose thinner. Many paints when stored for
some time before use will increase in viscosity and should
be thinned. Evaporates at a moderate rate and is completely
out of the paint film in several hours.
Item#
Size
Special
93-120CAQ
Quart
43.99 EA
SPRAYING THINNER 121/T-8
121 Spray Thinner for Antifouling is a fast evaporating
thinner used to reduce products before spray application.
The thinner flashes out rapidly.
Item#
Size
Special
93-121CAQ
Quart
45.99 EA
INTERDECK NON SKID FINISH
A tough, slip resistant deck paint that protects the surface
from every day wear and tear. It's easy to apply, comes in
a range of colours and its low sheen finish helps prevent
sunlight from reflecting off decks.
• Contains fine mineral additive for hard wearing, non-slip
surface
• Suitable for all substrates
• Apply straight from the can with brush or roller
Item#
94-YJF684QTCA
94-YJG009QTCA
94-YJB000QTCA
Color
Gray
Sand Beige
White
Size
Quart
Quart
Quart
EZ PRIME HIGH BUILD TOPSIDE
UNDERCOATER
A multipurpose primer designed for use as a base coat
whenever the surface to be painted is aged, cracked,
checked, pitted, or in any way less than smooth. It can be
applied to fiberglass, wood, properly etched metal, and
previously painted surfaces. EZPrime fills imperfections fast,
dries quickly, and is easy to sand. Its high-solids formula
has excellent filling and covering properties that produce
a smooth, prepared surface often times in just a one-coat
application. So versatile, it can be used below all Old Salem,
Z-Spar, Shipendec, and Pettit single and 2-part topside
enamels. Not for use below the waterline. EZ-Prime can be
tinted to better match the finish enamel so there is not such
a striking contrast between the two colors.
Special
62.99 EA
62.99 EA
62.99 EA
INTERGRIP NO SKID COMPOUND
Intergrip is a synthetic, granular material you can use on
topside finishes before application, or sprinkled onto wet
paint to add a more slip-resistant finish. The more you add,
the more grip you get.
• Creates a slip-resistant finish when added to or sprinkled
onto paint
• Can be applied by brush, roller or spray
• Easy to apply
Item#
94-2398CHPCA
Size
1/ Pint
2
Special
24.99 EA
Item#
93-6149CAQ
Bilgekote® is a fast drying, durable coating formulated
for application to bilge areas. Bilgekote® helps prevent
absorption of oil, gasoline or sludge into wood and
fiberglass.
• Hard wearing coating for bilges and bulkheads
• High opacity for thorough coverage
• Cleans easily for reduced upkeep
Color
Grey
White
Size
Quart
Quart
Size
Quart
Special
60.99 EA
PETTIT PROTECT® HIGH BUILD EPOXY
PRIMING SYSTEM
BILGEKOTE®
Item#
94-YMA100QTCA
94-YMA102QTCA
Color
White
Special
45.99 EA
45.99 EA
Item#
93-47004701CAQ
93-47004701CAG
A heavy duty, two component, epoxy coating for use where
maximum resistance to fresh or salt water is required. It
reduces water absorption making it an excellent choice
for osmotic blister prevention and repair. Its high-solids
formula allows for quicker and easier application with
fewer coats necessary for effective protection. It also offers
dependable corrosion protection on all underwater metals.
Like most epoxies, it should be topcoated to eliminate
chalking.
• Certified by Lloyd's Register
• High Solids Formula Requires fewer coats thus less labor
• Apply 2-3 Coats vs Competitors 6 coats
• Professionals Choice for Osmotic Blister Prevention
• Excellent Protection for Fiberglass, Steel, Aluminum, and
other Metals
Color
Size
Special
Gray
Quart
80.99 EA
Gray
Gallon
229.99 EA
RUSTLOK® METAL PRIMER
Adheres to all ferrous metals including steel, cast iron,
galvanized and stainless. Dries rapidly allowing for multiple
coats in a day.
Item#
93-6980CAQ
Size
Quart
Special
85.99 EA
