2025 SeaValue Canada Premium - Catalog - Page 238
236
Steering and Controls
Engine Controls
PROTECH FRONT MOUNT HYDRAULIC
STEERING CYLINDER
TWIN LEVER, SINGLE STATION CONTROL
Item#
50-28401
Made of chrome plated brass. Each separate lever
controls clutch and throttle for one engine. Functions
easily identified by red and black knobs. Designed
to use 33C type control cables. Shims and cable
clamps are made of brass and are supplied for easy
installation. Overall height 85/16"
Base: 45/16" W x 57/16" L x 3" H
Compatible with competing helms, hoses and oil, the UC128 cylinder is built to last
with heavy duty stainless steel cylinder rod, seals and link assemblies. Constructed
of top grade materials, this cylinder is simple to install and fits almost every two and
four stroke outboard engine in the market.
Not for dual station applications.
See engine application chart for more information.
Description
Twin Lever Control
Fastener
# 10 screws
Special
429.99 EA
Item#
216-UC128TS1
216-UC128TS2
Description
Volume Stroke Bore Size
Special
Standard w/Straight Arm 7.3ci
7.28" 1.37"
1194.99 EA
Standard w/Offset Arm
7.3ci
7.28" 1.37"
1194.99 EA
HOT FOOT™ FOOT THROTTLE
Dometic Hydraulic Steering
Improves throttle control for outboards and inboards.
A stainless steel spring returns engine to idle position
when released. Uses standard control cables for easy
hook-up.
Item#
232-HF1DP
Description
Universal
BAYSTAR COMPACT HYDRAULIC
STEERING SYSTEM
Application: BayStar is for singleoutboard powered boats rated up
to 150 HP, including runabouts and
inflatables and outboard engines
with ABYC standard engine tilt tubes
up to 150 HP (total). For single
station, single engine use only.
BayStar is not intended for high
speed, high performance type boats.
Special
408.99 EA
Power Steering
SEASTAR POWER ASSIST
Install on new SeaStar steering or to retro-fit to existing
systems. Suitable for most boat types, it uses an
electronically controlled hydraulic pump for on-demand
power steering. It installs between the helm and steering
cylinder and adjusts automatically to 12V or 24V.
Dramatically reduces steering effort. Wall or floor mount.
Compatible with power purge system. Return to manual
in failure mode. Suitable for use with autopilots. Wiring
harness included. Ignition protected (SAE J-1171). ABYC,
CE, NMMA, ISO 10592 Approved.
• 12 / 24VDC (automatically recognized)
• 1000psi MAX system peak pressure (500psi work load)
• Relief pressure 2000 psi
• MAX current draw = 50 amps
• Typical current draw = ~3 amps
• Purple ignition wire MAX current draw = 1 amp
Item#
1-PA12002
Description
Standard Power Assist, 15' Harness
Helm and cylinder equipped with adjustable O-ring fittings to simplify the
installation process and allow for simple reorientation of the fittings after installation.
Two year warranty.
• Requires 5" H x 6" D x 21" W minimum splashwell
• 5 Turns lock-to-lock
• Balanced cylinder fits most splashwells
• 5" footprint; needs only 3" hole (Standard or Tilt)
• Complete with helm, cylinder, fittings, tubing, oil, fill kit & instructions
• Standard 3/4" tapered shaft
• Meets A.B.Y.C. standards and meets NMMA certification requirements
Kits Includes:
• BayStar Helm 1.4 cu with adjustable O-ring fittings
• HC4645H3 - BayStar Compact Cylinder
• HA5430 (2) - Hydraulic Oil (1 liter)
• HT4420H - (2) 20' hoses (on select kits)
Item#
1-HK43004
Includes
HH43144 Std Helm w/o Tubing
Special
1593.99 EA
Special
4488.99 EA
XTREME POWER ASSIST
BAYSTAR OUTBOARD CYLINDER
Bring the smooth, easy control of
electric power-assisted steering to a
wide range of popular boats, including
pontoons, runabouts, RIBS, aluminum
fishing boats and center consoles. This
is an affordable, easy-to-install solution
that offers a more enjoyable driving
experience. 12' Wire harness included.
• Significantly reduced steering effort provides a car-like driving experience for
mechanically steered boats
• Engineered to fit a wide range of single engine, mechanically steered outboard
boats from 90-200HP
• Built in Fail-Safe System automatically reverts to mechanical steering in the event of
a system failure
• Integrates with any existing SeaStar rack or rotary steering system
• no need to install new steering to take advantage of this new technology
• A self-contained, plug-and-play system which easily mounts to all major outboard
brands and integrates with the boat’s existing mechanical steering in less than 30
minutes
Item#
Special
1-XPA1012P
3328.99 EA
This balanced cylinder features a compact design that fits most splashwells. BayStar
allows you to install all of the safety, reliability and comfort of hydraulic steering
onto your boats rated up to MAX. 150HP (Total). Combine this with the superior
design, rigid ISO quality control and teamed with the finest materials and precision
manufacturing. Uses HO51 series hose kits.
See Dometic website for specific year and model applications.
Item#
1-HC46453
Mount
Compact Cylinder (front mount) - Force/Honda/
Johnson/Evinrude/Mercury/Mariner/Suzuki/
Tohatsu/Yamaha
Special
1098.99 EA
