2026 MarineMax - Catalog - Page 230
228
Engine
Jack Plates
IMPELLER KIT
PRO-TRIM ENGINE TRIM/JACKPLATE
CONTROLLER
Dual
• Resistant to oil, acid and alkali
• Water-resistant
• Temp: -30°C to 200°C
• Made of flexible neoprene
Item#
Replaces
50-17783c Jabsco 13554-0001, Johnson 09-812B-1
Single
With Pro-Trim, you can keep both hands on the wheel and concentrate on your
driving. Clean, modern design looks great with no cords to tangle around the steering
wheel, a big plus with hydraulic steering! The Pro-Trim single-switch controls one
function (engine trim or jackplate) Pro-Trim Dual controls two functions (trim and
jackplate).
• Momentary-on switch is off in its center systems and adjusts for regular or
deep-dish wheels
"at-rest" position
• Color-coded wiring harness matches
• actuates in up and down directions
existing trim and jackplate wiring
• UV-Stabilized ABS switch cover
• All mounting hardware included
• Stainless bracket fits most steering
Special
Item#
Description
1-PT10002Pc
Single Function
119.49 EA
1-PT20002Pc
Dual Function
199.99 EA
Blades O.D.
Special
12
2.25" 33.99 EA
JOHNSON NAVAL BRASS CUTLESS
BEARING
STANDARD HYDRAULIC JACKPLATE
One of the sleekest and most durable engine Jackplates
available. This essential performance accessory allows
for higher speed, gains in fuel economy and the ability
to run in shallow water. Available in 4", 6", 8", 10"
& 12" setbacks, the high speed, hydraulic actuator
lifts engines 5.8" in 8.5 seconds. Tilt when used with
SeaStar steering cylinders.
• Easily moves engine up or down at full thrust
• Smooth operation with composite bushings
• Easy access to engine bolts
• Compatible with Power Pole® and Talon®
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and
are often used effectively as rudder-stock and pintle bushings. Bearing diameters are
precision fitted to the designated shaft size with the correct clearance for efficient
water lubrication. External brass shells are machined and polished to provide easy
fitting. Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell. Units with thin shells are available for the struts of small craft.
Item#
Shaft
O.D. Length
Wall Thickness
Special
1/ "
915-BACK
1" dia.
11/4" 4"
132.99 EA
32
3
1
915-BAIT
1" dia.
1 /8" 4"
/16"
140.99 EA
1/ "
915-BALE
1" dia.
11/2" 4"
137.99 EA
8
1/ "
915-BIND
11/4" dia.
11/2" 5"
175.99 EA
32
1/ "
915-BIRD
11/4" dia.
13/4" 5"
177.99 EA
8
1/ "
915-BOSS
11/2" dia.
2"
6"
244.99 EA
8
1/ "
915-CALL
2" dia.
25/8" 8"
343.99 EA
8
1/ "
915-CORD
21/2" dia.
31/8" 10"
525.99 EA
8
Item#
861-JP5040Rd
861-JP5060Rd
861-JP5080Rd
861-JP5100Rd
861-JP5120Rd
Setback
4"
6"
8"
10"
12"
HP
300
300
300
300
300
Special
1839.99 EA
1909.99 EA
2121.99 EA
2164.99 EA
2077.99 EA
Outboard Motor Brackets
HI-JACKER™ FIXED JACK PLATE
ALUMINUM 4-STROKE OUTBOARD MOTOR
BRACKET
TM
By MarineTech
Solid 3/8" aluminum extrusion, 3 engine mount and 2
transom mount holes, total vertical of 51/2" with a 4"
setback.
Item#
232-JP4FADPc
Setback
4"
Application
Max 150 hp
Special
219.99 EA
MINI-JACKER™
550410
550416
The black anodized aluminum bracket is built to handle the increased weight and
torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the
turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2"
thick polypropylene mounting board, along with aircraft-type stainless steel hardware
deliver heavy-duty performance. Motor safety cable is included.
Item#
781-550410
781-550416
u-
HP
Up to 35
Up to 35
Max Load
263 lbs
263 lbs
WARNING Cancer Causing v -
Vertical Travel
10"-5 Positions
16"-4 Positions
Designed for clamp-on mount outboard motors up to 35 hp. Improves performance
and handling of smaller or lighter boats. Also allows mounting of long shaft motors
to shorter shaft transom boats. Engine mounting surface is 111/2" x 10".
Special
432.99 EA
439.99 EA
WARNING Reproductive Harm
Item#
232-MJ1DPc
w-
WARNING Cancer and Reproductive Harm
Special
194.99 EA
See www.P65Warnings.ca.gov
