2026 Sea Value Canada - Catalog - Page 229
Steering and Controls
BULKHEAD STRAIN RELIEF
Auxiliary Motor Steering
T5 ELECTRO STEER STEERING SYSTEM
550503
Item#
781-550503
TM
Distributes strain from bends in .250 OD to .485 OD hose.
Watertight gripper fitting-no leaks. Requires 11/4" installation
hole.
For bulk hose only, fittings cannot pass through.
Item#
Dia.
Special
232-BSR1KDP
23/4"
47.59 EA
By MarineTech
The T5 provides a unique solution to steer a kicker motor
up to 40 hp. It can be installed on any kicker motor with
a threaded tilt tube without drilling any holes in the boat.
Installs in minutes and requires only 4" between the main
engine and the kicker. Controlled by an included 2 button
hand held remote with a 24' cable. Mounting hardware
included. Optional wireless remote available separately.
12V, 7.5 amps.
Description
T5 Electro Steer
Fits
Saltwater
Color
White
T5 NE ELECTRO STEER STEERING SYSTEM
RIGGING FLANGE AND HOSE
Special
1692.49 EA
TM
By MarineTech
The T5 NE models, without
electronics, connect directly to
the TrollMaster Pro 3 electronic
throttle and steering control unit
to provide an overall solution to
control the throttle and steering
for a kicker motor up to 40 hp.
It can be installed on any kicker
motor with a threaded tilt tube
550503
Kit contents
without drilling any holes in the
boat. Installs in minutes and requires only 4" between the main engine and the kicker.
Mounting hardware included. 12V. (Does not include Electronics, Remote or Relay
Switch Box)
Note: This is not a stand alone system and requires the TrollMaster control unit to
operate.
Item#
781-550503NE
Description
Electro Steer, No Wiring Harness
227
Fits
Color
Special
Saltwater White 1559.49 EA
Chrome/Black Kit
Black Flange
White Flange
Protects cables and wiring from dirt, abrasion, sun and water. The flange connects
the rigging hose from the engine to the boat. Internal threads on the flange retains
the rigging hose to make rigging adjustments easy. The back side of the flange is
textured to allow inverted mounting. The rigging hose is durable, flexible, and kink
resistant and is commonly found on new boats.
Item#
Description
Color
Size
Special
232-RFK1CPDP
Flange/Hose Kit
Chrome/Black
2" x 4'
131.19 EA
232-RF1DP
Flange
Black
2"
38.49 EA
232-RF2DP
Flange
White
2"
33.29 EA
RIGGING HOSE
Dress up, organize, and protect your outboard
rigging with our highly durable and flexible rigging
hose. Designed to shield cables from dirt, sun, water,
and abrasion,
Rigging Supplies
MOTORWELL BOOT
Seals off water intake and protects
cables, wiring and gas lines. Made
of durable vinyl plastisol.
• Durable and kink-resistant design ensures long-lasting protection
• Compatible with various rigging flanges for seamless boat engine connections
Item#
Size
Color
Special
Black
526.59 EA
232-RFHHD25DP
21/2", 50 ft. roll
ZIPPERED RIGGING SLEEVE
29251
29301
Item#
50-29301
50-29251
Size
3"
4"
Protect your cables and hoses with this easy to
remove rigging sleeve. Made of rugged Sunbrella®
fabric, this sleeve will withstand the elements and
resist fading. Easily zips on and off to access cables
or hoses when needed. Ends are secured with cable
ties sewn into pockets. Black.
Special
13.79 EA
18.99 EA
STEERING CABLE PROTECTOR
Heavy-duty rubber boot to fit over output end of steering
cable at engine for complete protection from elements
and preventing lubrication from being washed away. Fits
all standard steering cables including Morse, Teleflex,
Detmar, etc. Dimensions: 1" ID steering cable end, 3/8" ID
output end, 11/2" overall diameter, 10" extended length,
31/2" minimum length.
Item#
50-28301
Item#
232-ZRS1DP
Length
48"
Special
149.29 EA
CABLE BOOT
Special
14.39 EA
STEERING GUARD
The Steering Guard should be installed on all cable and
side-mounted hydraulic steering systems to lubricate, clean
and seal the system. Will more than double the life of a
new cable system. Made of stainless steel. Installs in 10
minutes. Eliminates greasy steering rods forever.
28251: Fits Honda, Mercury, Mariner, Johnson, Evinrude,
Nissan, Suzuki, Tohatsu, Yamaha and Force with 7/8" thread.
Item#
50-28251
Size
7/ "
8
KEY: Blue Item # =NEW | Red Item # =HAZARDOUS | YOversize |
Special
55.49 EA
CB2
CBR1
Provides a fully open area to pass wiring and cables through and when rigging is
complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil.
Item#
Description
Qty
Special
232-CB2
2" Cable Boot
Bulk
15.69 EA
232-CB1
3" Cable Boot
Bulk
18.99 EA
232-CBR1
3" Reinforcing Ring
Bulk
6.59 EA
1
232-CBR4
4 /2" Reinforcing Ring
Bulk
6.19 EA
To Our Valued Customers: Prices are subject to change without notice
