2026 Sea Value - Catalog - Page 155
Electrical
Terminal/Fuse Blocks & Buss Bars
TERMINAL BLOCK
4 Gang
6 Gang
8 Gang
Corrosion resistant construction. Moisture
repellent bakelite insulator base. Nickel plated
brass terminals and #8-32 screws. Protective
insulator barrier strips. Rated for 30A @12V.
10 Gang
Item#
50-13561c
50-13571c
50-13581c
50-13591c
Gangs
4
6
8
10
153
DUAL POWERPOST CABLE CONNECTOR
Provides a termination point for extending the length of
outboard harnesses or other conductors.
• Designed for connecting high amperage conductors
• 2018 is also designed for outboard engine installation when
factory cables need to be extended
• One-piece serrated flange nuts ensure correct and secure
connections
Specifications:
• Continuous Rating Not rated-amperage flows between
terminals stacked on post and is determined by wire and
terminals used.
• Voltage Max. Operating: 48V DC
• Mounting Holes Accepts: #10 (M5) Screws
• 2.75''L x 1.75''H
Item#
661-2018
Size
4" L x 15/16" W x 11/16" H
43/8" L x 15/16" W x 11/16" H
51/2" L x 15/16" W x 11/16" H
65/8" L x 15/16" W x 11/16" H
TERMINAL BLOCK
A closed back design completely
insulates power from the mounting
surface. Each screw pair is one isolated
circuit. Optional jumpers allow creation
of common circuits. Tin-Plated Brass.
6-Gang
ST-BLADE BATTERY TERMINAL MOUNT
FUSE BLOCK
4-Gang
Easy to install 4 ATO®/ATC® fused circuits mounts
directly on the battery terminal studs. Screw terminals
for securing wires with insulated ring terminals and
covers included.
Item#
661-2404
661-2406
661-2504
661-2506
Gangs
4
6
4
6
Amps
20
20
30
30
Fastener
#6
#6
#8
#8
DUALBUS 100 AMP COMMON BUSBAR
• Screw terminals for securing wires
• Accepts small format labels
• Insulating cover meets ABYC/USCG insulation requirements
• Ignition Protected - for use in a gasoline engine compartment
• Includes 4 write-on circuit labels
• Includes four 16-14 AWG and four 12-10 AWG Nylon insulated ring terminals
• Fuses sold separately
5024 includes a 4-circuit negative busbar
Item#
661-5024
Description
ATO / ATC Fuse Block Kit
Amps
30A
2702
2701
Item#
661-2701
661-2702
Great for limited space applications in electronics
cabinets and under dashboards. Features tin-plated
copper bus and stainless steel hardware.
Continuous amperage of 100 Amps and maximum
volts of 48DC / 300V AC.
Item#
661-2304
Connect high amperage cables securely. Includes
insulator caps. 48 volts DC maximum. Posts have no
amperage rating because amperage flows between
terminals stacked on the post and is determined by the
wire and terminals used.
Item#
661-2002
661-2003
Size
3.30'' x 1.75''
3.30'' x 1.75''
Stud
5 / " x 7/ ''
16
8
3 / " x 7/ ''
8
8
KEY: Blue Item # =NEW | Red Item # =HAZARDOUS | vOversize |
Gangs
5
Stud
#10-32
BUSBAR 150 AMP COMMON BUS
Industry standard BusBar features tin-plated copper
bus, 1/4" stainless steel studs and 8-32 terminal
screws. Continuous rating 150 Amps AC/DC,
maximum voltage 300 Volts AC, 48 Volts DC.
Item#
661-2340
POWERPOST CABLE CONNECTOR
Gangs
5
10
MINIBUS 100 AMP COMMON BUS
BATTERY TERMINAL MOUNT BUSBARS
Tin plated copper bus handles voltage up to 32VDC and is rated for 100 Amps. #832 Screw terminals w/captive star lock washers ensure a good connection.
Combine negative and positive buses
on one block. Features tin-plated copper
bus and stainless steel hardware.
Continuous amperage of 100 amps.
Maximum 48V DC / 300V AC.
Item#
661-2301
Gangs
10
Stud
/4"-20
1
DUALBUS PLUS 150 AMP COMMON BUS
Combines negative and positive busses on one block,
clear lexan lid snaps on to meet CG and ABYC insulation
requirements. Features tin-plated copper bus and stainless
steel hardware. Maximum Voltage 300V AC / 48V DC.
Continuous Rating The maximum current a switch is
designed to conduct for an indefinite period. 130A AC /
150A DC.
Item#
661-2722
Gangs
5
Stud
/4"-20
1
